Fix Up Loan Incentive Rate Energy Conservation, Energy Loan Plus and Accessibility Eligible Improvements

A reduced interest rate is available when loan proceeds will be used exclusively for the eligible improvements listed below, and when the borrower meets all other loan eligibility criteria. Bids and estimates for proposed improvements must identify product eligibility as indicated in the documentation column below.

NOTE: Homeowners cannot complete the labor with the energy loan options.

Energy Conservation Improvements
Eligible Energy ImprovementRequired Information in Bids/Estimate
Programmable ThermostatBid must reference Programmable Thermostat

Heating System Replacement¹* (Programmable Thermostat required):

  • Natural Gas or Propane Furnace: AFUE >= 95
  • Oil Furnace: AFUE >= 85
  • Natural Gas, Propane or Oil Hot Water Boiler: 
    AFUE >= 90 (ensure distribution system is compatible with a condensing boiler)

Any one of the following:

  • Bid must reference AFUE rating of the furnace or water boiler to be installed.
  • Copy of the product specifications indicating the AFUE rating.
  • Print out of Excel or PDF list from energystar.gov indicating the to-be-installed Make and Model and its AFUE rating.

Air Source Heat Pump (Programmable Thermostat required)

  • Split ducted (central) system
    • SEER2 ≥ 15.2 / SEER ≥ 16.0
    • EER2 ≥ 10.0 / EER ≥ 10.0
    • HSPF2 ≥ 8.1 / HSPF ≥ 9.5
  • Non-ducted (mini-split) system
    • SEER2 ≥ 16.0 / SEER ≥ 16.0
    • EER2 ≥ 9.0 / EER ≥ 9.0
    • HSPF2 ≥ 9.5 / HSPF ≥ 10.6
  • Packaged systems
    • SEER2 ≥ 15.2 / SEER ≥ 16.0
    • EER2 ≥ 10.0 / EER ≥ 10.5
    • HSPF2 ≥ 8.1 / HSPF ≥ 9.6

Any one of the following:

  • Bid must reference SEER2/SEER, EER2/EER, HSPF2/HSPF rating of the air source heat pump.
  • Copy of the product specifications indicating the SEER2/SEER, EER2/EER, HSPF2/HSPF rating.
  • Print out of Excel or PDF list from energystar.gov indicating the to-be-installed Make and Model and its SEER2/SEER, EER2/EER, HSPF2/HSPF rating.

A/C Replacement* (Programmable Thermostat installation required):

  • Package Systems: SEER >= 14, EER >= 12 (for equipment manufactured before 1/1/2023); SEER2 >=13.4 (for equipment manufactured starting 1/1/2023)
  • Split Systems: SEER >= 15, EER >= 13 (for equipment manufactured before 1/1/2023); SEER2 >=14.3 (for equipment manufactured starting 1/1/2023)
  • Mini-split systems: SEER >= 15, EER >= 13 (for equipment manufactured before 1/1/2023); SEER2 >= 14.3 (for equipment manufactured starting 1/1/2023)

Any one of the following:

  • Bid must reference SEER/SEER2 or EER rating of the A/C to be installed.
  • Copy of the product specifications indicating the SEER/SEER2 or EER rating.
  • Printout of the Excel or PDF list from energystar.gov indicating the to-be-installed Make and Model and its SEER/SEER2 or EER rating.

Water Heater Replacement:

  • Gas storage units >= 0.67 Energy Factor (EF)
  • Gas tankless units >= 0.82 EF with 2.5 gpm @ 77°F rise
  • Electric storage units = 0.95 EF
  • Electric heat pump storage unit >=2.0 EF

Any one of the following:

  • Bid must reference EF rating of the water heater to be installed.
  • Copy of the product specifications indicating the EF rating.
  • Print out of Excel or PDF list from energystar.gov indicating the to-be-installed Make and Model and its EF rating.

Light Fixtures:

  • Must be ENERGY STAR (ENERGY STAR CFL fixtures replace less efficient incandescent fixtures, are hardwired and use pin-based lamps).
  • Bid must reference ENERGY STAR light fixtures.
     

Insulation:

  • Walls: Wall cavities must be filled with insulation (if the cavity is to be filled with blown-in insulation, the cavity must be dense packed to 3.5 lbs/ft3).
  • Attic: Final R-Value >= R44
  • Attic Air Sealing is a prerequisite for insulation; pre- & post-blower door testing is recommended to measure effectiveness of air sealing.

All of the following:

  • Bid must reference insulation requirements that wall cavities be filled with insulation and/or attic insulation have an R-value of 44 or greater, as applicable.
  • Bid should also reference that attic air sealing be undertaken to the greatest extent feasible.
  • If wall cavities are filled with blown-in insulation, bid must reference the cavity will be dense packed to 3.5 lbs./ 3ft.

Windows:

  • Must be ENERGY STAR qualified under federal guidelines (patio doors are eligible).
  • Bid must reference ENERGY STAR windows.
Heat Recovery Ventilation System or Energy Recovery Ventilation System
  • Bid must reference the system’s maximum rated sensible recovery efficiency (SRE) is at 0°C of 65% or more.
Solar Panels
  • Only eligible under the secured Incentive Rate Energy Conservation loan.

*If the homeowner is changing fuel source or system type, the material and labor cost to install the complete system (i.e., new duct work, new lines, etc.) is eligible if the applicable energy rating referenced above is met.

Basic Accessibility Improvements
Eligible Accessibility ImprovementRequired Information in Bids/Estimate

Ramps:

  • Construction of entrance ramp

House Modifications:

  • Widening interior or exterior doors and/or hallways
  • Moving electrical outlets and switches
  • Installing handrails, grab bars or stairway lifts
  • Modifying hardware, doors or bathrooms

Safety:

  • Installing or modifying fire alarms, smoke detectors and other alerting systems
Bid must clearly specify design criteria or product specifications that will validate the accessibility function of the improvement.

Other Improvements:

  • For other Accessibility improvements not listed above, the Fix Up Loan Accessibility Evaluation Form must be used to document the accessibility needs of the Borrowers(s) and must be submitted to Minnesota Housing for prior approval.